ExiSpin™

ExiSpin™ is an instrument for protocols requiring repetitive vortexing and spin-down. Those can be setup to be automatically done with the installed program. Furthermore, up to four 8-strip tubes can be held to not only save time, but also mix the solutions for reproducible results. This product is applicable in most research areas using microtubules including, but not limited to, clinical molecular diagnosis, biochemistry, and molecular biology.

$900.00
In stock
SKU
A-7040

Features and Benefits

  • Fully Automated

    Convenient set-up through pre-installed program by entering the time and speed for the each spin-mix-spin cycle with number of repetition (1 - 999 cycles), with selective control of spin down and mixing process of microtube solution under different conditions depending on the kind of sample.

    1. 1st spin: Spin down samples to a bottom of tube

    2. Vortexing of samples

    3. 2nd spin: Spin down mixed samples to bottom of tube

  • Convenience & High reproducibility

    Optimized protocols provided depending on the sample types to reduce the error rate with reproducible conditions
    Minimized experimental time capable of loading four 8-well strips simultaneously to produce 32 PCR/qPCR mixtures or twelve 1.5 microtubules for cell lysis
    Easy replication of inputted protocols remaining during the power-on by just pressing few buttons

  • Economical Efficiency

    ExiSpin™ has both the ability to centrifuge and vortex and is very economical as it is not necessary to buy all two devices . Both rotors for 8-strip PCR tube and 1.5 ml microtubecentrifugal tube provided for ExiSpin™, along with ones for PCR tubes to reduce cost to buy additional accessories.

    ExiSpin
    Figure.  Rotors for 8-strip PCR tube [left] and 1.5 ml microtube [right] included in this product

Application

• Bacterial cell lysis

• PCR/qPCR Reaction

• Restriction enzyme reaction, kinase/ligation Reaction

• Experiments requiring repeated mixing and spin-down

Specifications

Dimensions (W X H X D)

19 cm (W) x 23.5 cm (H) x 12.5 cm (D)

Weight

2.7 kg

Spin regulation

1000 – 3500 rpm (increment 100 rpm)

Spin timer

1 sec- 99 min

Vortexing strength

Soft, medium, hard

SMS- cycle regulation

1 – 999 cycles

Power supply

AC 24 V, 1250 mA

Notice to Purchaser

Trademark:  ExiSpin™ is a trademark of Bioneer Corporation.

Manual

ExiSpin™ User manual


Brochure

ExiSpin


Quality Assurance

Bioneer is the holder of Quality Management System Certificates for the following standards.

ISO 9001 - certificate

ISO 13485 - certificate

Cat. No. Product Description Price
A-7040 ExiSpin $900.00
Copyright© 2019 BIONEER CORPORATION. All rights reserved.