ExiSpin™ has the functions of a vortexer as well as a microcentrifuge and will significantly save your time in the lab.
ExiSpin™ comes complete with rotor for 4 x 8-strip tubes and 12 x 1.5/2.0 ml tubes.
Use it for Minipreps, to resuspend oligos, set up your PCR reaction, or any task that requires vortexing in micro test tube or 0.2 ml PCR tubes.
Once you try the ExiSpin™, you will find it an essential instrument for your laboratory.
Contact your local
sales representative for a demo today.
Features and Benefits
|Full speed vortex and centrifuge:
||No need to vortex by hand and load a centrifuge to spin down
||Flexible programming ensures reproducible mixing
||For less than the cost of a Vortexer, you get a Centrifuge too!
Fully Automated Spin-Mix-Spin Technology
The time and strength of centrifugation/mixing is fully programmable. The numbers of
spin-mix-spin cycles can be set (1-999). After this input, a single button automatically starts the
process as follows:
1. 1st spin: Spin down samples to a bottom of tube
2. Vortexing of samples
3. 2nd spin: Spin down mixed samples to a bottom of tube
Convenience and High Reproducibility
It provides reproducible results using protocols optimized to samples by preventing
the possibilities of experimental errors. Four 8-strips tubes can be handled simultaneously, which
enable 32 PCR/QPCR mixture tubes ready to run at once. Twelve 1.5 ml tubes can be loaded for
simultaneous cell lysis and subsequent centrifuge-down. The programmed speed and time quarantine
the reproducibility of each application.
Economical and Efficient
ExiSpin™ has both a centrifuge and vortex function. You can save not only your time
but also the budget by purchasing one instead of two separate instruments. 12 x 1.5 ml rotor and
4 x 8-strip rotor (Figure. 1) are easily changed and both rotors are included in the basic system.
Figure 1. Presented rotors for 8-strip PCR tube [left] and 1.5 ml microtube [right]